Quick Link
Quick Contact
Address
Room 13G, No. 888 Wanhangu Road, Jing'an District, Shanghai, China
Tel
86--13912788181
Our Newsletter
Subscribe to our newsletter for discounts and more.
Our magnetic drive pump is a seal-less chemical centrifugal pump designed for transferring corrosive liquids in industrial waste gas treatment, wet scrubbers, chemical plants, and electroplating facilities. It features a 316L stainless steel outer body with a PTFE lining to protect the wetted flow path from many acids, alkalis, and chloride-containing solutions, subject to chemical compatibility and operating conditions.
Unlike conventional chemical pumps with mechanical shaft seals, this PTFE lined magnetic drive pump uses a magnetic coupling to transmit motor power to the impeller without direct shaft penetration through the pump casing. This seal-less construction eliminates the conventional dynamic shaft seal and significantly reduces the risk of process liquid leakage.
The product range covers reference capacities from 0.2 to 400 m³/h, heads from 1.2 to 80 m, and motor powers from 0.015 to 90 kW. Standard operating temperatures are approximately 0–100°C. It is suitable for scrubber circulation, acid transfer, chemical processing, and other compatible clean-liquid applications.
Chemical transfer pumps often encounter operating problems that increase maintenance costs and production risks:
Mechanical seal leakage: Corrosive liquids can damage mechanical seals, causing dripping, leakage, and frequent replacement.
Chemical corrosion: Incompatible metal surfaces may suffer pitting or corrosion when exposed to acids, alkalis, and chloride solutions.
Unexpected downtime: Seal failure can interrupt scrubber liquid circulation and reduce spray performance in waste gas treatment systems.
High maintenance costs: Repeated seal replacement and pump repairs increase operating expenses.
Dry-running damage: Insufficient liquid can cause internal bearings and isolation components to overheat or wear.
Solids-related wear: Suspended particles can damage internal bearings and obstruct narrow flow passages.
The PTFE lined magnetic drive pump uses a magnetic coupling and static isolation sleeve instead of a conventional mechanical shaft seal. The motor drives the outer magnetic rotor, which transfers torque to the inner magnetic rotor and impeller through the isolation sleeve.
The 316L stainless steel outer body provides structural support, while the PTFE lining protects the liquid-contact surfaces in compatible chemical environments. This combination is designed for corrosive liquid transfer where leakage control is important.
With no conventional dynamic shaft seal, the pump reduces the potential leakage path associated with rotating shafts. It is suitable for chemical circulation, scrubber spray systems, acid washing lines, and other clean-liquid applications. For stronger chemical conditions, alternative materials such as Hastelloy or titanium may be considered after compatibility evaluation.
To maintain reliable operation, ensure continuous liquid supply, avoid dry running, and prevent solid particles from entering the pump.
| Parameter | Specification |
|---|---|
| Pump Type | Magnetic Drive Centrifugal Pump |
| Pump Body | 316L Stainless Steel |
| Wetted Surface | PTFE Lined |
| Drive Design | Magnetic Coupling, Seal-less |
| Reference Flow Range | 0.2–400 m³/h |
| Reference Head Range | 1.2–80 m |
| Motor Power Range | 0.015–90 kW |
| Standard Temperature Range | 0–100°C |
| Available Speed | 2900 / 1450 rpm |
| Optional Materials | Hastelloy, Titanium, Other Austenitic Alloys |
| Typical Applications | Scrubber Circulation, Chemical Transfer, Acid Washing |
Selected Model Reference Data
| Model | Flow (m³/h) | Head (m) | Speed (rpm) | Power (kW) | Voltage (V) |
|---|---|---|---|---|---|
| CQB15-10-85 | 0.4 | 8 | 2900 | 0.18 | 380 / 400 |
| CQB20-15-105 | 0.8 | 12.5 | 2900 | 0.37 | 380/ 400 |
| CQB32-20-125 | 3.2 | 20 | 2900 | 1.1 | 380/ 400 |
| CQB50-32-160 | 12.5 | 32 | 2900 | 4 | 380/ 400 |
| CQB65-40-250 | 25 | 80 | 2900 | 18.5 | 380/ 400 |
| CQB100-65-250 | 100 | 80 | 2900 | 45 | 380/ 400 |
| CQB150-125-315 | 200 | 32 | 1450 | 37 | 380/ 400 |
| CQB200-150-315 | 400 | 32 | 1450 | 75 | 380/ 400 |
The table shows selected models, not the complete product range. Confirm actual operating points using the manufacturer's performance curves.
The magnetic drive chemical pump is suitable for:
Wet scrubber circulation: Transferring washing liquid to spray nozzles in industrial exhaust gas treatment systems.
FGD and gas washing systems: Circulating compatible process liquids in desulfurization and absorber systems.
Chemical liquid transfer: Handling compatible acids, alkalis, and industrial chemical solutions.
Electroplating and acid washing: Moving process liquids in surface treatment production lines.
Wastewater treatment: Transferring compatible chemical treatment liquids.
Seawater systems: Selected applications requiring suitable corrosion-resistant materials.
Typical buyers include environmental equipment manufacturers, scrubber contractors, chemical plants, electroplating factories, distributors, and industrial maintenance teams.
The electric motor rotates the outer magnetic rotor. Its magnetic field passes through a stationary isolation sleeve and drives the inner magnetic rotor connected to the impeller. The impeller then transfers energy to the liquid through centrifugal action, delivering it through the pump outlet.
Because the rotating shaft does not penetrate the pump casing, there is no conventional dynamic shaft seal. The isolation sleeve and static sealing components contain the process liquid. The magnetic coupling also provides a torque limit, but it should not be treated as a substitute for overload protection.
Determine flow and head: Calculate the required scrubber circulation flow, pipeline losses, elevation, and nozzle pressure.
Check the performance curve: Select a model that operates near its suitable efficiency range rather than relying only on maximum flow or head.
Confirm chemical compatibility: Provide liquid composition, concentration, and temperature to verify PTFE lining and other wetted materials.
Check liquid conditions: Magnetic drive pumps are generally intended for clean liquids with limited solids. Confirm viscosity and specific gravity.
Verify operating temperature: The reference standard range is 0–100°C. Confirm any special temperature requirements.
Confirm electrical supply: Specify voltage, frequency, motor power, and installation requirements.
Send us your liquid details, required flow, total head, temperature, voltage, and application for model selection and quotation.
Q1: Does a magnetic drive pump have a mechanical seal?
No. It uses a magnetic coupling and isolation sleeve instead of a conventional dynamic shaft seal, reducing the risk of leakage through the rotating shaft.
Q2: Is the PTFE lined pump suitable for acid and alkali liquids?
It is suitable for many compatible chemical liquids. Final material selection depends on chemical type, concentration, temperature, and exposure conditions.
Q3: Can the pump run dry?
No. Dry running can cause overheating and damage to internal bearings and isolation components. Continuous liquid supply is essential.
Q4: Can it handle slurry or liquids containing solid particles?
Standard magnetic drive pumps are generally designed for clean liquids. Suspended solids may cause wear, blockage, or bearing damage. Confirm particle size and concentration before selection.
Q5: What is the maximum operating temperature?
The reference standard range is approximately 0–100°C. Confirm the actual temperature limit for the selected model and material configuration.
Q6: Which model is suitable for 12.5 m³/h at 32 m head?
The CQB50-32-160 is listed at 12.5 m³/h and 32 m head with a 4 kW motor. Confirm the required operating point against the manufacturer's performance curve before ordering.