Quick Link
Quick Contact
Address
Room 13G, No. 888 Wanhangu Road, Jing'an District, Shanghai, China
Tel
86--13912788181
Our Newsletter
Subscribe to our newsletter for discounts and more.
Our U shape finned heating element is designed for industrial air heating, catalytic combustion equipment and waste gas treatment systems. Its U-shaped tubular construction fits compact heating chambers, while the external metal fins increase the heat transfer surface area for heating flowing air or process gas. The element uses a stainless steel sheath, high-purity magnesium oxide insulation and a resistance heating wire selected according to the required electrical load and operating temperature.
Available in 220 V, 230 V,380 V and 400 V configurations, this custom finned tubular heater can be manufactured to drawings or samples. Length, tube diameter, fin pitch, power rating, bend dimensions, terminals and mounting flanges can be customized to match existing equipment. It is suitable for dry-air heating in catalytic combustion preheating sections, industrial exhaust gas treatment equipment, drying ovens and process air heating systems, subject to the actual gas composition, temperature and safety requirements.
U Shape Stainless Steel Finned Heating Element

Industrial gas heating systems may experience slow temperature rise, uneven heating and frequent element replacement. Insufficient heating capacity can prevent exhaust gas from reaching the required process temperature. Poor airflow distribution may create local hot spots, while dust accumulating between fins reduces effective heat transfer and makes cleaning difficult.
Other common problems include sheath deformation caused by excessive surface temperature, insulation resistance reduction due to moisture absorption, and premature resistance wire failure caused by unsuitable watt density. Replacement can also become difficult when the original heating element has a non-standard bend, terminal or mounting dimension.
The U-shaped finned tubular heating element provides a compact installation layout and an enlarged heat transfer surface. Its stainless steel sheath, magnesium oxide insulation and resistance wire are selected according to the required operating conditions. Fin spacing can be customized to balance heat transfer, airflow resistance and cleaning requirements.
Custom manufacturing allows the voltage, power, active length, tube diameter, bend radius, terminal arrangement and flange dimensions to match the existing heating chamber. Correct watt density and suitable temperature control help reduce overheating risks and support stable operation. For dusty exhaust streams, the heating arrangement should also allow inspection and cleaning access.
Finned Tube Design for Efficient Heat Transfer

| Item | Specification |
|---|---|
| Product Type | U Shape Finned Tubular Heating Element |
| Voltage | 220 V / 230 V / 380 V / 400 V / Custom |
| Shape | U Shape, Finned Tubular |
| Sheath Material | Stainless Steel, Grade to Be Confirmed |
| Heating Wire | High-Grade Resistance Alloy |
| Insulation | High-Purity Magnesium Oxide |
| Power Rating | Custom to Drawing |
| Tube Length and Diameter | Custom to Drawing |
| Fin Pitch | Custom to Drawing |
| Terminals and Flanges | Custom to Drawing |
| Manufacturing | Made to Drawing or Sample |
Final material grade, power, dimensions, watt density and temperature limits should be confirmed for each application.
This custom industrial finned heater can be used in:
Catalytic combustion and RCO preheating sections
RTO systems where the heater is specified for the preheating duty
Industrial waste gas treatment equipment
Process air heating and ventilation systems
Industrial drying ovens and tunnel furnaces
Heating chambers and industrial duct air systems
For VOC-containing or potentially explosive exhaust streams, the installation location and electrical heating arrangement must comply with the equipment design and applicable safety requirements.
When electrical current passes through the resistance wire, electrical energy is converted into heat. The high-purity magnesium oxide transfers heat from the resistance wire to the outer sheath while providing electrical insulation. The stainless steel tube then releases heat to the surrounding air or process gas.
The external fins increase the available heat transfer area, allowing the element to exchange heat with the moving gas stream. The U-shaped bend places the active heating section inside the chamber while the terminal connection can be arranged outside the main heating zone, depending on the installation design.
Custom Finned Heaters for Industrial Equipment

Confirm supply voltage: Select 220 V, 230 V, 380 V or 400 V according to the available power supply and wiring arrangement.
Calculate required heating power: Provide gas flow, inlet temperature, target outlet temperature and expected heat loss.
Specify operating conditions: Confirm continuous or intermittent operation, maximum temperature and whether the element operates in clean air or exhaust gas.
Select sheath material: Confirm the gas composition, moisture, corrosive components and operating temperature before choosing the stainless steel grade.
Determine fin spacing: Consider dust concentration, particle characteristics, airflow and cleaning frequency.
Confirm installation dimensions: Provide tube length, diameter, U-bend radius, terminal position and flange dimensions.
Review control and safety requirements: Specify temperature sensors, over-temperature protection, airflow interlocks and any hazardous-area requirements.
1. Can the U shape finned heating element be customized?
Yes. Voltage, power, tube length, diameter, fin pitch, bend dimensions, terminals and mounting flanges can be manufactured according to an approved drawing or sample.
2. Is this heater suitable for catalytic combustion equipment?
Yes. It can be used for preheating air or process gas in catalytic combustion systems when its materials, power rating and surface temperature are suitable for the equipment design.
3. Can it be used in RTO systems?
It may be used in designated RTO preheating applications. Confirm the operating temperature, gas conditions and installation position with the RTO system designer.
4. Why are fins used on tubular heating elements?
Fins increase the heat transfer surface area and can improve heat exchange with flowing air or gas. Their spacing should consider dust accumulation, airflow resistance and cleaning access.
5. Which stainless steel grade is available?
The sheath grade should be selected according to temperature, humidity and exhaust gas composition. Please confirm the available grades and chemical compatibility before ordering.
6. What information is needed for a replacement heater?
Provide the original heater, drawing or sample, together with voltage, power, dimensions, fin pitch, terminal arrangement and operating conditions.
7. How can premature heater failure be reduced?
Correct watt density, suitable material selection, stable airflow, temperature control and regular inspection help reduce overheating and insulation-related failures.