Quick Link
Quick Contact
Address
Room 13G, No. 888 Wanhangu Road, Jing'an District, Shanghai, China
Tel
86--13912788181
Our Newsletter
Subscribe to our newsletter for discounts and more.
Pall Ring Random Tower Packing Ceramic 304 316L Acid Alkali Resistant
Product Overview
This random tower packing is a dumped packing for absorption, stripping, scrubbing and desulfurization towers. The range covers Pall ring, Raschig ring, polyhedral hollow ball, CMR, Tellerette and Intalox saddle in PP, PVC, CPVC, 304, 316L stainless steel and ceramic, with PTFE and silicon carbide for severe duty. Pall rings are punched from metal sheet with two rows of window openings and inward tongues covering about 35% of the wall, so gas and liquid pass freely and distribution improves. The result is high throughput, low pressure drop, good mass transfer and wide operating flexibility. Standard sizes run from 10 mm to 90 mm, with specific surface area up to 482 m²/m³ and void ratio up to 96% for metal and 94% for plastic. Ceramic grades handle high temperature and strong acids where plastics and stainless steel fail. Custom sizes and materials are available for tower revamps and OEM projects.
Pall Ring Random Tower Packing for Industrial Applications

Cause: Why Packed Beds Lose Efficiency
Plants lose efficiency when the bed is selected by price alone. Common problems: the tower floods at design load, pressure drop climbs and the blower runs at its limit; liquid channels and wets poorly, so mass transfer falls and outlet concentration rises; plastic packing softens above its temperature limit; stainless rings pit under chlorides; ceramic rings break during handling or thermal shock. In scrubbers, the wrong packing also blinds with dust or gypsum solids, and cleaning becomes a shutdown. These issues trace back to material mismatch, wrong ring size, or ignoring fouling and flooding limits.
Solution: Match Material First, Then Geometry
Match material to chemistry and temperature first, then select geometry. PP handles dilute acids and alkalis to 80°C; CPVC extends to 100°C with better chlorine resistance; 304 and 316L serve general chemical and desulfurization duty to 400°C but are limited by chlorides; ceramic resists most inorganic acids and 800°C; PTFE and SiC cover the most aggressive duty. Pall rings give higher capacity and lower pressure drop than Raschig rings at the same size, and the windowed wall resists fouling better. Polyhedral balls suit low-resistance scrubbing, while saddles and Tellerette rings favor high surface area and good distribution.
Specifications
| Material | Size (mm) | Specific Surface Area (m²/m³) | Void Ratio (%) | Bulk Weight (kg/m³) |
|---|---|---|---|---|
| 304 / 316L | 10–76 | 71–482 | 93.8–96.6 | 262–480 |
| PP / PVC / CPVC | 16–90 | 58–213 | 82–94 | 40–108 |
| Ceramic | 25–80 | 75–238 | 70–81 | 520–600 |
Application
Absorption and stripping towers, flue gas desulfurization scrubbers, HCl and ammonia scrubbers, chemical and petrochemical columns, vacuum distillation, wastewater stripping, marine exhaust and high-temperature ceramic beds.
How It Works
Gas and liquid contact over the packing surface. In a Pall ring, liquid falls as a film on the outer and inner walls while gas rises through the open windows; the inward tongues redirect flow and renew the film, raising mass transfer. The open structure gives a high void ratio, so gas passes with low resistance and the bed tolerates higher load before flooding. Random orientation repeatedly splits and remixes the liquid, improving distribution.
Pall Ring Packing in Multiple Materials

How To Choose
Confirm chemistry and temperature first, because the wrong material fails fast even when geometry is right.
Size the ring: smaller rings give more surface area and efficiency but higher pressure drop; larger rings give capacity and fouling tolerance.
Check the pressure drop budget at design gas and liquid rates, and stay clear of flooding.
For dusty or scaling duty use larger rings and plan a wash cycle.
Confirm bed depth, tower diameter and support plate opening.
Run a corrosion test for mixed or high-chloride streams.
FAQ
1. What is the difference between a Pall ring and a Raschig ring?A Pall ring has a windowed wall with inward tongues, giving higher capacity, lower pressure drop and better distribution; a Raschig ring is a simple hollow cylinder with lower efficiency but lower cost.
2. Which material should I use for an HCl scrubber?PP or CPVC for dilute hydrochloric acid at moderate temperature, ceramic where temperature is high, and 316L only where chloride concentration is low.
3. What is the maximum working temperature?PP 80°C, CPVC 100°C, 304/316L 400°C but lower in corrosive gas, ceramic 800°C, and silicon carbide 1200°C.
4. Can ceramic packing handle HF?No. Hydrofluoric acid attacks silica-based ceramic; use PTFE or silicon carbide instead.
5. Why does pressure drop rise over time?Fouling, scale or gypsum solids block the voids, and flooding raises resistance; larger rings and a wash cycle help.
6. Can size and material be customized?Yes. Ring diameter, wall thickness, material grade and bed depth are made to the tower design.
7. How do I select the right ring size for my tower?Provide gas and liquid rates, tower diameter, and required efficiency. Our engineers will recommend ring size and material to stay within pressure drop and flooding limits.