Quick Link
Quick Contact
Address
Room 13G, No. 888 Wanhangu Road, Jing'an District, Shanghai, China
Tel
86--13912788181
Our Newsletter
Subscribe to our newsletter for discounts and more.
The sintered metal fiber felt mist eliminator is a high precision demister for fine mist removal in clean, dust-free gas. Unlike woven wire mesh, it is made from ultra-fine metal fibers sintered into a porous felt with fine, tortuous passages, so droplets are intercepted deep inside the media instead of only at the surface. It captures droplets in the 2 to 5 micron range, giving higher removal efficiency than conventional wire mesh. Materials include 304/316L stainless steel, Hastelloy C276, Monel, Inconel, titanium and nickel, with custom alloys. It withstands high temperature and corrosion, separates fine mist at low pressure drop, and serves spray scrubbers, desulfurization towers and fine chemical or pharmaceutical exhaust.
Cause: Fine Mist Escapes Conventional Wire MeshWire mesh demisters rely on surface impaction. Their openings are relatively large, so droplets below about 5 microns pass through and fine mist escapes downstream. That mist carries acid, solvent or product, causing corrosion of fans and ductwork, visible stack plumes, exceeded emission limits and contaminated process gas. In hot or corrosive service, wire mesh also degrades and efficiency falls. Plants then add chevrons or a second mesh stage, raising pressure drop without solving the problem.
Solution: Depth Filtration with Sintered Metal Fiber FeltThe sintered metal fiber felt solves the problem through depth filtration. Ultra-fine fibers are sintered into a uniform porous felt with much finer passages than woven mesh, so 2 to 5 micron droplets are captured inside the media, coalesce and drain away. The all-metal structure withstands high temperature and corrosive gas, and the open pores keep pressure drop low. Select the alloy for the gas chemistry: 304/316L for general service, C276 for chlorides and acids, Monel, Inconel, titanium or nickel where specified.
Specifications| Parameter | Specification |
|---|---|
| Product type | Sintered metal fiber felt mist eliminator, high precision demister |
| Filtration mechanism | Depth interception through fine sintered fiber pores |
| Target droplet size | 2 to 5 micron fine mist |
| Removal efficiency | Higher than conventional wire mesh demisters, site dependent |
| Standard materials | 304 and 316L stainless steel fiber |
| Alloy options | Hastelloy C276, Monel, Inconel, titanium, pure nickel |
| Custom materials | Available on request |
| Temperature and corrosion | High temperature and corrosion resistance |
| Pressure drop | Low, confirm against actual airflow |
| Duty | Clean, dust-free gas; fine chemical, pharmaceutical, clean exhaust |
| Applications | Spray scrubbers, desulfurization towers, gas-liquid separation |
| Sizing | Custom dimensions and element configuration |
Fine chemical and pharmaceutical plants, clean exhaust, spray scrubbers and desulfurization towers. It suits gas-liquid separation where the gas is clean and dust-free: acid mist after scrubbing, solvent mist, carryover from packed towers, and mist control before downstream equipment or discharge. It also suits hot or corrosive duty where polymer elements and ordinary mesh fail.
How It WorksFine mist passes through the sintered fiber felt. Because the passages are fine and tortuous, droplets impinge on the fiber surface and are captured deep inside the media. They coalesce into films and larger drops, which drain by gravity while clean gas passes through. The open metal structure keeps resistance low, and sintered bonds keep the matrix stable under vibration and thermal cycling.
How To ChooseFirst confirm the gas is clean and dust-free: dust blinds the pores, so this is not a dust filter. Second, define the droplet size and required outlet mist level; the felt targets 2 to 5 micron mist. Third, select alloy: 304/316L, C276 for chlorides and acids, Monel, Inconel, titanium or nickel. Fourth, size the element area for the actual flow so face velocity stays within design, and confirm pressure drop with the fan. Fifth, specify vessel dimensions, connections and drainage.
FAQ